Hydrogen in the Tank – Sounds Dangerous?

Hydrogen is widely regarded as a promising source of energy for vehicle propulsion. Fuel cell vehicles in particular are seen as a clean alternative to combustion engines. Recently a number of announcements were made regarding the expansion of the market portfolio for hydrogen vehicles in the coming years. While Toyota unveiled the third generation of their fuel cell system at the 2025 H2 & FC EXPO in Tokyo, which will debut in 2026, BMW recently announced the market entry of their ix5-hydrogen for 2028. Additionally, Toyota has demonstrated several concept vehicles fueled by hydrogen over the last years, such as the Toyota Hilux fuel cell pick-up, the Corolla Cross H2 powered by a hydrogen combustion engine or the GR Yaris primarily propelled by a combustion engine combined with a fuel cell for electricity production for boost purposes. But as soon as hydrogen is mentioned, alarm bells start ringing for some. Danger of explosion? High pressure risk? In this article, we take a closer look and clarify how safe hydrogen vehicles really are.

How dangerous is hydrogen?

Hydrogen is an extremely light, colorless and odorless gas. It is flammable, yes - but it is also volatile as it is approximately 14 times lighter than air. Unlike petrol or diesel, hydrogen evaporates rapidly into the atmosphere in the event of a leak, instead of collecting or forming puddles. Additionally pure hydrogen cannot be ignited. Still, if mixed with oxygen, or ambient air, it can form a combustible medium with wide ignition limits of 4-70 vol% of hydrogen.

In general, 1 kg of hydrogen contains as much energy as 2.8 kg of petrol or 2.1 kg of natural gas, which increases its value for energy conversion purposes but also showcases the dangers that lie within hydrogen as a propulsion fuel.



The decisive factor is that hydrogen is not dangerous in general, but only under certain conditions - and it is precisely these that modern vehicles actively exclude. The fact that hydrogen was once associated with disasters such as the Hindenburg-Zeppelin is historical but has little to do with today's technology.

Which safety standards apply to vehicles?

Hydrogen-powered vehicles are subject to strict safety requirements in Europe - regulated by the UN ECE R134 regulation, among others. This stipulates comprehensive tests: From overpressure tests to flame tests and crash scenarios, all relevant aspects will be closely investigated.

The tanks themselves are made of high-strength carbon composite material and can withstand pressures of at least 1000 bars, more than 250 times that of a car tire. For each production batch, manufacturers will perform cycle and burst testing for one tank of the batch showcasing 22,000 fillings and demonstrating the burst-proofness of 2.25 times the net working pressure of 700 bars, meaning the tank has to withstand at least 1,575 bars before bursting occurs.

During crash testing manufacturers of the tank systems will expose the bare tank to a frontal crash with a standard passenger vehicle at around 50 km/h which must not lead to any damage or leakage to the tank.

Finally, the bonfire testing of the carbon composite tanks will be performed to showcase the proper functioning of the thermal pressure release devices in case of temperature increases that could potentially endanger the tank stability.

The regulation SAE-J2578 composes technical recommendations to further increase the general safety of fuel cell vehicles. Therin the society of automotive engineers recommends for example the positioning of relieve devices so that the hydrogen flow will be guided to prevent further accidents as well as design and integration of TPRDs and measures to include in case of a crash-scenario.

Additionally, hydrogen vehicles are subject to all other safety regulations that are relevant for diesel or petrol cars and have to withstand the same crash-tests and fulfill all general safety requirements that are common to other types of passenger vehicles.

What happens in case of malfunctions or accidents?

Hydrogen tank systems are also equipped with sensors, safety valves and emergency shutdown systems that react automatically in the event of irregularities such as overpressure or temperature rise. This way the safety devices ensure that the tank system will never reach pressures or temperatures even close to the proven load limits.

These safety devices include temperature sensors within the tank system and on its surface, pressure sensors, impact sensors, hydrogen leakage sensors, pressure relieve valves and thermal pressure relive devices (TPRD).

In case of the detection of (non-critical) overpressure the pressure relieve valve will release hydrogen from the tank in a controlled procedure.

Should the internal or external tank temperature reach the boundary limit, which is still well below the critical temperature for structural decomposition, the TPRD will burst and release all hydrogen from the tank system to ensure a safe state.

In case of the detection of a collision, measured through an acceleration sensor, the tank system controller will release the hydrogen from the tank system in a controlled, nondestructive way to prevent any interactions arising from subsequent events to the crash itself, such as fires or structural damages.

What practice shows

Theory is one thing - but what happens when things get serious? Previous accidents involving fuel cell vehicles show that the safety systems work. In 2023 a total of 87600 fuel cell electric vehicles had been registered around the world and there are no known cases in which a hydrogen tank has exploded in an accident.

Even in severe crash tests, the tank structure remained intact and safety valves triggered correctly. Fire departments are now also trained in handling H2 vehicles and report a similar level of operational safety to electric cars or combustion engines.


In conclusion, hydrogen may sound dangerous but thanks to modern technology and high safety standards, it is not. Anyone who gets into a fuel cell car today not only drives emission-free, but also with a high level of safety.



Picture: TÜV Nord

Sources:


Toyota Motor Corporation


BMW Group


Brian D. Erhart, Dusty M. Brooks et al.: Risk Assessment of Hydrogen Fuel Cell

Electric Vehicles in Tunnels (2020)


Pengyuan Shao, Hengxin Zheng: Comparison of Electric Vehicles and Hydrogen Fuel Cell

Vehicles (2023)


IEA Global EV Outlook (2024)


ADAC Hessen Thüringen E.V.: Wasserstoff als Antriebsalternative – Was steckt dahinter (17.05.2023)


TÜV-Nord: Hydrogen: Properties, Safety, Dangers (2025)

Newsletter

Hier informieren wir regelmäßig über alle wichtigen Entwicklungen im Bereich des Wasserstoffs, der Brennstoffzelle und des Elektrolyseurs.

Downloads

Hier informieren wir regelmäßig über alle wichtigen Entwicklungen im Bereich des Wasserstoffs, der Brennstoffzelle und des Elektrolyseurs.

Whitepaper: In-line Viscosity Measurement

Download a white paper on innovative solutions in the areas of real-time process monitoring and quality assurance