Daimler Truck und Linde Engineering demonstrieren sLH2-Betankung

The sLH2 refuelling station in Wörth, jointly developed by Daimler Truck and Linde Engineering, was presented in more detail. Lower operating costs as well as faster and technically less expensive refuelling than with gaseous hydrogen are possible here. The developers hope that an open source refuelling standard will also attract other truck manufacturers and infrastructure companies to the technology.
Increased efficiency of the refuelling process
In contrast to traditional refueling methods utilizing liquid hydrogen (LH2), the novel approach employs an new pump to incrementally boost the pressure of the liquid hydrogen, transforming it into subcooled liquid hydrogen (sLH2). This modification would yield a remarkably robust and stable refueling procedure, minimizing energy wastage throughout the process. Furthermore, the need for data transfer between the refueling station and the vehicle would be eliminated, streamlining the process further. Concurrently, the refueling capacity would be elevated to unprecedented levels, with the station capable of accommodating 400 kg of liquid hydrogen per hour. Compared to conventional refueling with liquid or gaseous hydrogen, sLH2 would offer a technically simpler yet more efficient solution.
Expansion of refuelling technology is pursued
In pursuit of establishing a universal refueling standard for hydrogen-powered trucks, this technology shall be accessible to all interested parties through an ISO standard. Andreas Gorbach, a member of the Board of Management at Daimler Truck, and Jürgen Nowicki, CEO of Linde Engineering, inaugurated the first public sLH2 pilot station in Wörth am Rhein today, marking the occasion with the refueling of a Mercedes-Benz GenH2 truck in the presence of Petra Dick-Walther, State Secretary for Economic Affairs of Rhineland-Palatinate, and international press representatives.
Andreas Gorbach, Member of the Board of Management of Daimler Truck AG, responsible for Truck Technology: "To decarbonise transport, we need three factors: the right battery and hydrogen trucks, the necessary infrastructure and cost parity between zero-emission and diesel vehicles. The transformation of vehicles is in full swing. Today, we are reaching an important milestone in the hydrogen infrastructure: thanks to the sLH2 standard, refuelling with hydrogen will be as easy as with diesel - in around 10 to 15 minutes, the tank will be full for a range of over 1,000 km. We are now calling on other truck manufacturers and infrastructure companies to follow our approach and work together to make this technology the industry standard!"
Jürgen Nowicki, Executive Vice President Linde plc and CEO of Linde Engineering: "sLH2 significantly increases the efficiency of hydrogen refuelling systems. The required investment is reduced by a factor of two to three and operating costs are cut by a factor of five to six. This and other advantages make sLH2 a practical, CO2-neutral alternative to diesel refuelling in heavy goods transport. The technology that we have developed together with Daimler Truck paves the way for a nationwide refuelling infrastructure that today's logistics chains depend on."
The companies are aiming for an industry standard
Daimler Truck and Linde Engineering would aim to establish sLH2 as the premier hydrogen refueling technology for heavy trucks. In pursuit of this goal, both companies would prioritize transparency and openness regarding the pertinent interfaces of the collaboratively developed sLH2 technology. Standardized through an open ISO process, this technology shall be available to all interested parties. Daimler Truck and Linde Engineering now urge other OEMs, infrastructure companies, and associations to adopt the new liquid hydrogen standard, thereby catalyzing the establishment of a global mass market for their process.
Trial for the first customers in 2024
Five companies would be poised to seize the opportunity to try CO2-free long-distance transportation using fuel cell vehicles starting in mid-2024. These articulated trucks would ply specific routes in Germany across various long-haul transport applications, refueling at the recently inaugurated liquid hydrogen filling station (sLH2) in Wörth am Rhein and at a station in the Duisburg area. In collaboration with Daimler Truck and its partner companies, this initiative would serve as a flagship project, showcasing the feasibility of decarbonized transport through hydrogen-powered trucks today. Nevertheless, for the transition to hydrogen-powered freight transport to be sustainable, ensuring a comprehensive and global refueling infrastructure and a sufficient supply of green liquid hydrogen will be paramount in the coming years.
Source
Newsletter
Hier informieren wir regelmäßig über alle wichtigen Entwicklungen im Bereich des Wasserstoffs, der Brennstoffzelle und des Elektrolyseurs.
Downloads
Hier informieren wir regelmäßig über alle wichtigen Entwicklungen im Bereich des Wasserstoffs, der Brennstoffzelle und des Elektrolyseurs.
Whitepaper: In-line Viscosity Measurement
Download a white paper on innovative solutions in the areas of real-time process monitoring and quality assurance
